|
|
|
|
Products
+
+
+
+
+
Irigation systems / Garden components
| V-1550 Series |
|
|
|
The V-1550 Series with MultiMatrx nozzle provides the flexibility to do more with less. With a twist of a screwdriver, adjust gallons per minute, arc and radius – all from the top of the head. V-1550 Series is a great choice for residential and light commercial applications.
MultiMatrx Nozzle
V-1550's MultiMatrx nozzle with TruJectory allows infinite trajectory adjustments from 7° to 25°. You can fine-tune the height of the nozzle spray to compensate for the wind or to spray under low-hanging obstructions. The MultiMatrx design saves labor costs and lowers the need to keep additional nozzles on hand. What's more, it makes post-installation inspections a snap.
TruJectory System
Working in conjunction with the MultiMatrx nozzle, the TruJectory system allows infinite trajectory adjustments from 7° to 25°. You can fine-tuning the height of the nozzle spray to compensate for the wind or to spray under low-hanging obstructions. TruJectory adjustments can be made from the top of the sprinkler-wet or dry-minimizing the time required to fine-tune the sprinkler system.
Check Valve
Check valve prevents low-head drainage and keeps laterals charged with water (standard on all lawn pop-up models and optional on shrub models) |
|
| SimpleSet |
|
- Gear-Driven sprinkler for medium to large lawns, 27' - 47' spacing.
- Stainless-steel adjustment screw allows up to 25% radius reduction.
- Laser-etched increase/decrease graphic indications on cap for setting arc pattern.
- 3 interchangeable nozzles1.5 GPM, 3.0 GPM (factory installed) and 6.0 GPM nozzles included.
- Arc adjustment from 30 to 360 degrees.
- Water-lubricated, gear driven design allows for quiet, smooth and reliable operation.
- Slip clutch assures no damage to the gear drive (stripping) if tampered with. |
|
| Toro Ez Flo Series Plastic Irrigation Valves |
|
|
|
Properties:
- line or corner valves
- 3/4” and 1” interior and exterior spiral versions
- flow control version (FC)
- can be manually opened
- the valve-box and the cap made from with heavy-duty plastic with fiberglass
- compact solenoid presentation
- heavy-duty cap ring for fast and easy servicing
- slow closing to prevent leaking
- double-beaded diaphragm
- Operating pressure: 0,7 - 10 bar
-solenoid: 50Hz (24 V a.c.)
- inrush:0,34 A, 11,50 VA
- holding: 0,20 A, 5,75 VA |
|
| Toro EZ Flo Plus |
|
|
|
EZ-Flo Plus Series' jar-top design makes it the convenient choice for residential applications. With its threaded bonnet system and heavy-duty cap ring (no screws needed), these valves allow for easy maintenance checks and servicing.
Buna-N Diaphragm Seat Seal
The soft-but-strong material of the Buna-N diaphragm seat seal ensures a tight seal between the plastic seat and the rubber diaphragm of the EZ-Flo Plus valves. It prevents debris from ripping the diaphragm, which can happen with pure rubber diaphragms. That means no leaks.
Bleed Systems
EZ-Flow Plus valves come with both internal and external bleed systems. Internal bleed saves water, while external bleed flushes out debris. Floating bleed tube allows thermal expansion without affecting performance.
Durable Construction
EZ-Flo Plus valves are made with heavy-duty corrosion and UV-resistant PVC, glass-filled nylon and stainless-steel. They are built to last. |
|
Back
|
|
|
